teknotik.com
06-27-2007, 07:27 AM
COMPETITON CLUTCH Forged Ultra Lightweight Steel Flywheel
The STU flywheel is recommended for forced induction and/or track and rally racing applications. This flywheel will work with ALL performance and stock clutch assemblies.
Qualities of the CCI Ultra Lightweight Steel Flywheel:
One piece ring gear for high durability
Weight varies from 8 lbs. to 10 lbs. depending on application
Well suited for Stage 3 and up clutch kit applications
Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specifications
Reduced Mass = Increased Accleration
http://www.competitionclutch.com/images/artdetail_45.jpg
8.7lbs
$370 Shipped tax in to your door next day!
COMPETITION CLUTCH Forged Aluminum Flywheel
Qualities of the CCI Forged Aluminum flywheel:
A. Grade 8 Aircraft quality friction surface bolts.
B. Course ground surface to maintain coefficient of friciton.
C. Stepped pin to maintain plate balance and placement.
D. Tig-welded safety tab to eliminate ring gear seperation.
E. Heilicoil bolt holes to insure proper torque value and eliminate thread damage.
Allows engine to more rapidly transfer power to the drive train and to have quicker throttle response. Motor will rev faster under acceleration. Reduces typical turbo "lag" with turbo-charged engines. Increases supercharger efficiency due to less parasitic drag on the crank. Improves mid-range torque in normally aspirated engines.
http://www.competitionclutch.com/images/artdetail_48.jpg
7lbs
$370 Shipped tax in to your door next day!
The STU flywheel is recommended for forced induction and/or track and rally racing applications. This flywheel will work with ALL performance and stock clutch assemblies.
Qualities of the CCI Ultra Lightweight Steel Flywheel:
One piece ring gear for high durability
Weight varies from 8 lbs. to 10 lbs. depending on application
Well suited for Stage 3 and up clutch kit applications
Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specifications
Reduced Mass = Increased Accleration
http://www.competitionclutch.com/images/artdetail_45.jpg
8.7lbs
$370 Shipped tax in to your door next day!
COMPETITION CLUTCH Forged Aluminum Flywheel
Qualities of the CCI Forged Aluminum flywheel:
A. Grade 8 Aircraft quality friction surface bolts.
B. Course ground surface to maintain coefficient of friciton.
C. Stepped pin to maintain plate balance and placement.
D. Tig-welded safety tab to eliminate ring gear seperation.
E. Heilicoil bolt holes to insure proper torque value and eliminate thread damage.
Allows engine to more rapidly transfer power to the drive train and to have quicker throttle response. Motor will rev faster under acceleration. Reduces typical turbo "lag" with turbo-charged engines. Increases supercharger efficiency due to less parasitic drag on the crank. Improves mid-range torque in normally aspirated engines.
http://www.competitionclutch.com/images/artdetail_48.jpg
7lbs
$370 Shipped tax in to your door next day!