MY 93 civic 2DR coupe D16Z6 setup.

[Carnage]

http://www.redliners.ca/forum/userpix/14890_last_of_old_paint_015_1.jpg
http://www.redliners.ca/forum/userpix/14890_peace_019_1.jpg
http://www.redliners.ca/forum/userpix/14890_car_001_1.jpg

My budjet project. about 2400$ so far.

D16z6 stock 320 000k motor with new head Gasket.
Jackson racing supercharger set at 8 psi.
ZEX 59300 cam
AEM cam gear set at 1 degree ret
Ebay headers & high flow-cat.
Flowmaster muffler.
Accel spark plug cables.
Ebay cold air.

B18C OBD-1 throttle body
Stg2 ebay clutch.
Dx tranny.
Map-sensor controller box.
FMU
Strut bars.
H-Brace.
Sitting on Skunk 2 springs
on TSW 15" with toyo winter grip tires.
98 LX fr seats
95 SI rear black seats
91 SI head-rest
94 DX center console.

This is my projet/daily driver car. My goal is to see how far I can push the dollar towards HP and reliability. LEt me know if you have any more ideas to add to this.

RED line that SHIT ! lol

[613B6]

Nice setup! To add a touch more fun into the car, look for a pulley that can bump your boost up a bit, ditch the dx tranny for the shorter Si, and get ride of that FMU for something that is tunable.

[civic_lover87]

hey I saw u 2day going up orleans blvd ( i was with the wife in the black mpv u passed :P ), I knew I heard a superchrager lol nice car

[ImprezaWRX]

is this chris or chris' bro?? i see you guys ALL the time out there

one thing ive always wondered is whats the deal with the paint job

maybe im old school - but how is flat black a finished product?

hey man i see u driving around orleans alot car looks sick

[Axis]

High Mileage? :?
yet again... its a civic

[teRcel]

i saw you today at place dorleans with your XXX liscence plate frame

[TYPERRER]

nice man! i like this color, what is it?

[Shawarma]

Stephane!

nice man! i like this color, what is it?

satin black, flat black, homedepot plack, primer black, tremclad black

[BrettR]

nice man! i like this color, what is it?

satin black, flat black, homedepot plack, primer black, tremclad black

Satin is not flat, stoops.

[Carnage]

Its flat black painted with a paint gun & 45 PSI. no primer, no clear coat + its dirt cheap to paint ! = looks decent. I'm in the process of rebuilding my SI tranny, 3rd gear sincro gave out. * its tremclad flat back paint

[Carnage]

Nice setup! To add a touch more fun into the car, look for a pulley that can bump your boost up a bit, ditch the dx tranny for the shorter Si, and get ride of that FMU for something that is tunable.

Its a budjet project. ofter then my SI tranny going back in, not to much more money gonna be spent on this project.

[JDMCRX]

Best mods for you are find a Si tranny to get into the better gear ratio for better power distubution. Also the CRV pulley does fit on the D series ill have to dig up the post and see what the specs were and boost. Hondata and a 3" cold air will help you lots. the biggest problem with the JRSC is heat. they heat soak bad. So everything you do to keep the engine bay temps to a min and the intake temps to a min will help you.

[cvt]

you should get rid of your FMU and chip your ECU.
I have a D16ZC VTEC with the Jackson racing supercharger in my 95 coupe, hackish tuned it with uberdata for 10 lbs.

[Carnage]

you should get rid of your FMU and chip your ECU.
I have a D16ZC VTEC with the Jackson racing supercharger in my 95 coupe, hackish tuned it with uberdata for 10 lbs.

Yeah that sounds like a real great idea, but this thing is on a real budjet. This has to be done on a budjet. its my project car. I'm trying to see how far i can push the dollar for HP. any ideas ?

[Carnage]

Stephane!
???????

[PoLaRBe4r]

got any numbers?

[Carnage]

got any numbers?
nope, i'm thinking around 15.2 at about 180 hp ish.