Nolimits 1 hour speacial, 15% over cost.

[NoLimits]

I've done this a few times and had some fun with it. Its quite this afternoon, so anyparts you want will be going out the door at just 15% over cost.
I dont care what it is, from engines to hose clamps, you have one hour to put a post in this thread.

Is mike loosing his mind? we're not really sure.

[Andre]

What's the price on a bedliner for my camion?

GMC 6'6" box

I'm not looking for anything crazy, just one without holes cut in it :evil:

[NoLimits]

What's the price on a bedliner for my camion?

GMC 6'6" box

I'm not looking for anything crazy, just one without holes cut in it :evil:

Underrail style to work with your bed rails, would be $145.00 + tax.
I can get Harley ones also if you want a bit more redneck in it :lol:

[EvilDeadFan]

Mike, how much would the Bosch Icon wipers be with that discount? 18" and 22" I believe.

[NoLimits]

$18.50 and $17.50 for drivers and passengers Dan.

Mike

[matt06]

fuck, i always miss this lol

[NoLimits]

fuck, i always miss this lol

Nothing happened anyways :lol: , so what do you need?

[matt06]

fuck, i always miss this lol

Nothing happened anyways :lol: , so what do you need?

here''s some of my list

Hawk hp brake pads

Air/fuel gauge

Mugen front lip

Energy suspension bushings

Sparco / momo 4point harness

Itr cluster

Cluster bezel for gauges (one that goes around cluster for 2 1/6 guages)

Weighted shift knob (skunk2 or something nice)

Oil pressure sender unit

Radiator cooling plate

and prices for

Brembo rotors

skunk2 intake manifold and throttle body

arp headstuds

high quality valve springs and retainers


i know theres more, i have to start writing this shit down'

[NoLimits]

fuck, i always miss this lol

Nothing happened anyways :lol: , so what do you need?

here''s some of my list

Hawk hp brake pads What size rotors?

Air/fuel gauge Wideband like AEM? Or autometer?

Sparco / momo 4point harness

Itr cluster

Cluster bezel for gauges (one that goes around cluster for 2 1/6 guages)

Weighted shift knob (skunk2 or something nice)

Oil pressure sender unit Autometer gauge? up to what preassure?

Radiator cooling plate

and prices for

Brembo rotors

skunk2 intake manifold and throttle body

arp headstuds What engine code?

high quality valve springs and retainers


i know theres more, i have to start writing this shit down'

What year/make/model and engine code? Im assuming civic, what size rotors on the front, 9.5" or 10.25"

Mike

[matt06]

its a 97 intagra rs

engine is ls vtec. b16 head b18b block

[nissannx]

Mike can you get gas ice augers????? I hope you know a secret dealer that can get you super deals on them. im sick of my hand aueger.


Thanks

Adrien

[NoLimits]

:lol: Fuck, never been asked for that before :lol:

I'll check, but dont think so, Lebaron or Crappy tire are probably your best bet.

I'll let you know if I can get one.

Mike

[matt06]

just out of curiosity, you guys getting me prices?

i realize its alot of shit and might take a while so no rush

and you can eiother post or pm me prices please

[nissannx]

ive checked both and there in the $400 price range and nobody sells these used. they last forever. See what you can find, heres hoping

[Casper97RS]

ive checked both and there in the $400 price range and nobody sells these used. they last forever. See what you can find, heres hoping

Here's an "almost new" used one...and it comes with some ice fishing gear:

http://www.usedottawa.com/classified-ad ... ry=fishing (http://www.usedottawa.com/classified-ad/4436362&category=fishing)

[NoLimits]

just out of curiosity, you guys getting me prices?

i realize its alot of shit and might take a while so no rush

and you can eiother post or pm me prices please

Yep, just working on it, I'll post up here for you.

Mike

[nissannx]

ive checked both and there in the $400 price range and nobody sells these used. they last forever. See what you can find, heres hoping

Here's an "almost new" used one...and it comes with some ice fishing gear:

http://www.usedottawa.com/classified-ad ... ry=fishing (http://www.usedottawa.com/classified-ad/4436362&category=fishing)

i just saw that one and a ice shelter too. i sent him an email. new would be ideal but this isnt bad either.

[Casper97RS]

ive checked both and there in the $400 price range and nobody sells these used. they last forever. See what you can find, heres hoping

Here's an "almost new" used one...and it comes with some ice fishing gear:

http://www.usedottawa.com/classified-ad ... ry=fishing (http://www.usedottawa.com/classified-ad/4436362&category=fishing)

i just saw that one and a ice shelter too. i sent him an email. new would be ideal but this isnt bad either.

haha...yeah I saw that ice shelter too...pretty pimpin set-up! I figured you would prefer new, but since you mentioned "nobody sells used ones" and the fact that this one looks to be in great shape, figured it was worth pointing out if you hadn't seen it yet.

Anywho, good luck with the search...I'm sure there's a little wiggle room in that guys asking price as well!

[LxSedan]

Hey Matt06 here is some pricing for you of what I can get, some of the parts will need a bit more info, ie the gauge and stuff for designs and whatnot but it will give you the general idea.

Hawk HPS Front Pads - $54
Hawk HPS Rear Pads - $41
A/F Gauge Autometer Ultralite - $64
Energy Suspension Master Set - $133
Sparco 4pt Snap in harness - $130
Gauge Cluster Bezel - $70
Skunk2 Weighted Shift Knob - $40
Oil Pressure Sender 80 psi - $31
Oil Pressure Sender 100 psi - $30
Brembo Sport Drilled Rotors Front - $145
Brembo Sport Drilled Rotors Rear - $107
Skunk2 Intake Manifold - $277
Skunk2 Throttle Body - $304
ARP studs B16A - $140


Cheers,

Johnny

*EDIT* Sorry, Edited Prices to reflect only 15% and not regular =)

[FC3S-USD]

Can I get on this game too please :) .

* Class 4 hitch for 2001 Ford F250 ( long cab ) 4x2 with triton 5.4 2 vlave motor.

* Tranny cooler kit for above ( I guess you need to know tranny, Ill find out some thing this weekend , but its automatic ).

*Major tune up stuff

*plugs
* ( i believe the 5.4 doesnt use wires, but if it does then wires )
*fuel filter
*oil filter

thanks

[AzNKiD]

Mike, how much would the Bosch Icon wipers be with that discount? 18" and 22" I believe.

Got my driver's side at Bank St. Mazda with the OMC discount and it was $25 tax in.. good deal from Mike

[NoLimits]

Can I get on this game too please :) .

* Class 4 hitch for 2001 Ford F250 ( long cab ) 4x2 with triton 5.4 2 vlave motor.

* Tranny cooler kit for above ( I guess you need to know tranny, Ill find out some thing this weekend , but its automatic ).

*Major tune up stuff

*plugs
* ( i believe the 5.4 doesnt use wires, but if it does then wires )
*fuel filter
*oil filter

thanks

Hidden hitch 41922 is a class 4, 1000lb tongue, 10000lb weight carrying capacity, or 12000lb with weight distribution, $272.00
I have aprox 40 differant hitches, but to me this is best suited and no drill install. They do have economy models too, but there more work for install, but cheaper.
Let me know what style of plug is on the trailer and I can get you the proper trailer connector, also check if the trailer has electric brakes in case we need a brake controler also.

Tranny coolers are between $40.00-100.00 depending on quality and size, So basicly I can find anything to suit his budget.

Fuel filter is $8.30
Oil filter is $4.00
PCV is $4.00
For air filter, I need to know if its cone shaped like my head or rectanguler.
Also theres a cabin filter that year, might want to change that also.
NGK single platinum Gpower plugs are $5.30ea, no wires used.

Might be a good time for a cold air intake, 10.9hp at the wheels for the K&N :wink:

Mike

[nissannx]

Did you get my ice auger Mike???? lol Still waiting for my quote

Adrien

[srswarts3]

Hey Matt06 here is some pricing for you of what I can get, some of the parts will need a bit more info, ie the gauge and stuff for designs and whatnot but it will give you the general idea.

Hawk HPS Front Pads - $54
Hawk HPS Rear Pads - $41
A/F Gauge Autometer Ultralite - $64
Energy Suspension Master Set - $133
Sparco 4pt Snap in harness - $130
Gauge Cluster Bezel - $70
Skunk2 Weighted Shift Knob - $40
Oil Pressure Sender 80 psi - $31
Oil Pressure Sender 100 psi - $30
Brembo Sport Drilled Rotors Front - $145
Brembo Sport Drilled Rotors Rear - $107
Skunk2 Intake Manifold - $277
Skunk2 Throttle Body - $304
ARP studs B16A - $140


Cheers,

Johnny

*EDIT* Sorry, Edited Prices to reflect only 15% and not regular =)



LS/VTEC's require 94-01 acura integra GSR headstuds

[matt06]

picked up some stuff that i needed later that day before you posted.

[NoLimits]

picked up some stuff that i needed later that day before you posted.

How did we do on the pricing? Still need anything?

Mike

[matt06]

ya i need a couple things.

just finishing up finals right now then its work and car over the holidays