coming to a track near you! 608whp 510ft/lbs

[civiccx1]

Well decided to build this car again.

Well Another Autoxtrem built Eurodyne tuned success

Drag car made 608whp 510ft/lbs on race fuel at 32psi only later in the season 39-40psi and 700+whp but we have a good start with what we have

dyno sheet friday

Bullseye s362 full boost at 4500rpm

on pump gas 24psi made over 500WHP

Huge thanks

Eurodyne for once again making a hell alot of power.
Tkrace for the awesome head
Martin at supertech
A1 cv tech axles
Motul
Royal lepage
Denis and Pete from the shop
my wife for letting me do this for a 2nd time









Fully built 2.0 20v
Aeg Crank
wiseco piston
Scat rods
Fully ported polish AEB head by Tkrace.com
Full Supertech valvetrain( SS intake valve, Inconel exhaust, Titanium retainer, HD springs, Valve lock)
Cat Cams
Full racecraft SS equal lenght manifold
Bullseye S362 .70a/r V/band 700WHP turbo
Tial 44mm WG
02J tranny with peloquin
BFI stage2 motor mouns
Bully stage5 clutch kit with solid 4 puck disc
lightweight flywheel
Aluminium rad with 10" fan
custom axles
custom Autoxtrem CAD design Water/air intercooler (design by our own Piston Pete)
Custom autoxtrem Intake manifold
S4 TB
Custom autoxtrem fuel rail
1000cc injectors
custom Eurodyne.ca software
ME7 ECU
Aeromotive a1000 fuel pump
RCI 1 gallon fuel cell
Odyssey light weight batterie
Full Hotbits coilovers with custom valving and spring rate
urethane all around
10 roll cage
custom dash with stewart warner gauges (40psi boost, oil psi, water temp, oil temp, volt
Aem wideband
lexan windows
Weld magnum 13x9 on 24.5x9x13 mickey thompson fronts
Weld magnum 15x4 on 24.5x4x15 rear skinnies
Kirkey seat
Autometer prolite shift light
G-force 5 point cam lock harness
G-force safety net

http://i6.photobucket.com/albums/y250/autoxtrem/IMG_1090.jpg
http://i6.photobucket.com/albums/y250/autoxtrem/IMG_1074.jpg
http://i6.photobucket.com/albums/y250/autoxtrem/IMG_1073.jpg

[mx3frik]

whoa looks like a sweet project! What are you shooting for in the 1/4? Whp? boost?

[Simpo]

Oh...a German Bully :?


http://www.danheller.com/Movies/Hellboy/nazi-robot-big.jpg

hello awhp'z!

[civiccx1]

we are aiming to go has fast has we can, everything on paper looks great but it`s not that easy.

we have the motor set up to go up to 40psi of boost with ELF racing fuel 124 octane leaded gas.... dyno next week

[Jdc]

That is quite insane.

[4G64T]

Sweet Jebus... That's the direction i'm eventually headed in with my project only for now it has to share DD duties... droooollllllll

can't wait to see her at the track!

[Stroked-Z]

I dunno why the heck you guys are building FWD drag cars.....if you guys want to 1/4 mile drag race, use a RWD platform at least.

Looks like lots of "whp" and an ET that wont match

-Carm

[civiccx]

because I love a challenge :D and im a Vw guy it's that simple.

i was with Pierre last year at napierville i was the guy with the vw wagon running 12.4.

this thing will move on the 1/4 mile. we will make sure of that.

[Jdc]

AWD ftw. Nice job on the car. The pics make my eye's go :shock:

[Stroked-Z]

AWD ftw. Nice job on the car. The pics make my eye's go :shock:

AWD, f the center sections...from what i've seen.

Good job on being there @ Napierville last Sept.....i was too busy kicking @$$ or i would of come said Hi.

-Carm

[civiccx1]

yeah Carm if i had a beast like yours i would not bother talking either. hope to see it run next year. Would like to See Ricks car go also

[Jdc]

AWD ftw. Nice job on the car. The pics make my eye's go :shock:

AWD, f the center sections...from what i've seen.
-Carm


What do you mean by that? I just don't understand it's meaning! :? f = fuck? Center section of the 1/4 mile?

WARNING noob here: flame suit on, rubber insult band streched, finger on computer power bar switch (in case I get really upset :cry:)....... and g/f by my side, holding my hand, stroking my hair, whispering "people like you" in my ear, and....... CATCHING IT ALL ON WEBCAM STRAIGHT TO MF YOUTUBE :!:

Usually when my imagination go nuts, I delete these bits at the end of my posts. I suppose this can stay.

[613B6]

looks killer, nice turbo choise, BW has made major jumps over the Garrett stuff in the last year or so.

GL at the track :devil:

[civiccx1]

yeah for sure im very happy with the S258 on my passat wagon making 418whp on all stock small port head intake and tb only running rods on stock piston

this one here will make a hell of alot more power for sure. tuesday is tuning time

will post results asap

[613B6]

Since your running eurodyne, I assume Chris is tuning it? Hes doing some great stuff with the VAG stuff as I see your shops a dealer now. GL on the dyno, wanna see nothing less than 700. :D

[civiccx1]

we have lots invested and a long season ahead with lots of testing. low boost should get us 500WHP wich we will start testing with, but we do have a 2 step bc so..

[dwarrick]

good to hear tapp is doing good with the VAG :mrgreen:

thats one bad ass looking vw thou

[civiccx1]

yeah i always ran with SDS in the past tuned by myself, but the stock me7 has been doing good with BT, we will take this ME7 to higher grounds, and this will help everyone involve in the project. good exposure for us and Eurodyne.

[T5shortblock]

Looking good Marc, this is a very sexy setup, you diden't feel like plumbing the water to air beside the driver seat? :P

Tuning with ME7 is awesome, that's what my car is tuned with, the stock BOSCH with ME7.

Will Tapp be doing this?

[civiccx1]

yeah Tapp got the job, we are pushing the stock me7 stuff so this is the way to promote it even further

[613B6]

WOW, killer numbers Marc, was it tough to keep that power to the rollers? Big TQ!

[civiccx1]

going back next week for more, this is the sheet of only base line tuning


http://i6.photobucket.com/albums/y250/autoxtrem/IMG_1094.jpg

http://i6.photobucket.com/albums/y250/autoxtrem/IMG_1093.jpg

[613B6]

I hope you got a vid!!!!!!!!

[civiccx1]

next week, got a bigger turbo in the works so will make more power :D

[frank2003]

didnt u run 10's @ luskville?

[Simpo]

osti d'malade! lache pas ! :)

[civiccx1]

now making 615whp new turbo on the way and set of Raceware head studs.

Yeah we found the limit of the stock head bolt 615whp 545ft/lbs did it :D hg gasket gone.

[Simpo]

Woaah!! Solid as fuck for the time it last!

You're the guys in the industrial park in gat right? on varenne ..

[civiccx1]

yeah, can't wait to get the studs and bigger turbo :D

[Lancer]

Excellent numbers !
good job !

[CRAZYBEN]

Dam those are some nice number's! Congrats! Cant wait to see what kinda numbers it makes at the track. Kepe us posted.

STAY POSI
CRAZYBEN

[civiccx1]

Now S370 billet is installed compresor wheel is 101.9mm VS 84.6mm so we will make alot more power and spool time is only about 400rpm so im still looking at full boost below 5k wich fro drag racing is perfect.

We also got a Boost by gear Boost controller from world motorsports and you can adjust the ramping, duty, gain in each gear so it will help control the boost to 1/10 psi and put the power down at the track.

http://i6.photobucket.com/albums/y250/autoxtrem/IMG_1131.jpg
http://i6.photobucket.com/albums/y250/autoxtrem/IMG_1129.jpg

[Lancer]

We also got a Boost by gear Boost controller from world motorsports and you can adjust the ramping, duty, gain in each gear so it will help control the boost to 1/10 psi and put the power down at the track.


Let me know if that controller works as advertised. I need to control my boost better.
Right I'm working with the wastegate spring only on the Talon.
18 psi in 1st gear, 25 psi in 2nd and 31 psi in 3rd gear and 33 psi in 4th.
I want 20psi in 1st and 31 psi in all other gears !